Table of Contents
Advertisement
PICTBRIDGE
Confirm the transfer-mode
option in section 1 of the setup menu is
set to PTR Connect the camera to a PictBridge compatible
printer
using the camera's USB cable. The larger plug on the cable is
connected
to the printer. Slide the card-slot
door toward the back
of the camera to release the safety catch and open. Insert the
smaller plug of the cable into the camera. Turn the camera on; the
PictBridge screen is displayed
automatically.
Individual still images can be selected for printing on the PictBridge
screen; RAW and images with
the embedded
Adobe RGB color profile (p. 61) are not displayed
and cannot be selected. Adobe
RGB images without an embedded
profile can be selected, but color reproduction
may not be
accurate because
of printer compatibility
with the color space. For other printing options, see the
menu navigation section on page 128.
Use the leff/right keys of the controller to display the
image to be printed.
O
Total number of prints
Number of copies
Press the up key to select the number of copies to be
printed. To deselect an image for printing, press the
down key until the number of copies reaches zero. A
maximum number of fifty images can be printed.
Repeat the previous steps until all the images to be
/ff_'X\
printed are selected. Press the central button of the
controller to continue.
PictBridge
screen
The display button switches between the single frame and index playback formats on the
PictBridge screen. Enlarged playback,
activated with the enlarge button (p. 38), can be used to
examine image files on the screen.
The number of prints in the print run are displayed
as well as the
print parameters
selected with the menu. See the menu navigation
section for more information
(p. 128). Press the central button of
the controller to begin printing, or press the menu button to return
to the PictBridge screen.
Once printing begins, the operation can be canceled by pressing
the center of the controller. The printing-finished
message
indicates the end of the operation;
turn the camera off to end the
routine.
NOTES ONPRiNTiNG ERRORS
If the battery is exhausted
before the print run is complete,
printing is canceled. Use a fully-charged
battery or the optional AC adapter.
If a minor problem occurs during printing, such as the paper runs out, follow the procedure
recommended
for the printer; no action is required for the camera, if a major printer error occurs,
press the center of the controller to end the routine. Refer to the printer manual for the correct
procedure for the printer problem. Check the printer settings before starting again and deselect the
images that were printed.
i
Printing
Notes
_,_
Always confirm printer and camera settings before a print run to minimize errors. Setting print
parameters with the PictBridge menu (p. 128) avoids having to set up the printer for each
printing session, especially if the printer is used for multiple purposes.
Advertisement
Table of Contents
