Konica Minolta DiMAGE A200 Instruction Manual page 81

Compose the picture as described in the basic recording
section (p. 30).
To make an exposure bracket, press and hold the shutter-
release button all the way down (1); three consecutive images
are captured.
Normal
Under
Over
0.3 Ev
bracket
To make a white-balance bracket, press and release the
shutter button. Three consecutive images are made from
a single exposure.
The bracketing drive mode indicator is displayed when set. The remaining number of
frames in the series is displayed next to the indicator during the bracket.
To make a flash bracket, raise the camera flash; the ambient exposure is not bracketed.
When using flash, single-frame advance is employed and the shutter-release button must
be pressed for each exposure.
When exposure brackets are made in S exposure mode, the aperture controls the
bracket. In A and M modes, the shutter speed controls the bracket; in M mode, pressing
the AE lock button during the bracket changes the exposure control to the aperture.
Normal
Under
Over
0.5 Ev
bracket
Frame counter
Bracketing mode
81
1