Setting The Bluetooth Audio Codecs - Sony MHC-V6D Operating Instructions Manual

Erasing all the pairing
registration information
Use the buttons on the unit to
perform this operation.
1
Press BLUETOOTH to select the
BLUETOOTH function.
"BLUETOOTH" appears on the
display.
If the system is connected to a
BLUETOOTH device, the BLUETOOTH
device name appears on the
display. Press BLUETOOTH to
terminate the BLUETOOTH
connection.
2
Hold down  and FLANGER for
about 3 seconds.
"BT HISTORY" and "CLEAR" appear
on the display and all the pairing
information is erased.
Setting the BLUETOOTH
audio codecs
You can select the BLUETOOTH
audio codecs when the connected
BLUETOOTH device supports
Advanced Audio Coding (AAC).
1
Hold down SHIFT, then press
OPTIONS.
2
Press  /  repeatedly to select
"BT AAC," then press
3
Press  /  repeatedly to select
"ON" or "OFF," then press
• ON: Select this setting if the
BLUETOOTH device supports
Advanced Audio Coding (AAC).
• OFF: Select this setting if the
BLUETOOTH device only
supports Sub Band Codec (SBC).
Notes
You can enjoy high quality sound if
ˎ ˎ
the AAC is selected. In case you cannot
listen to AAC sound from your device,
select "OFF."
If you change this setting while the
ˎ ˎ
system is connected to a BLUETOOTH
device, the BLUETOOTH device will
be disconnected. To connect to the
BLUETOOTH device, perform the
BLUETOOTH connection again.
.
.
45
GB