Specifications - Sony MHC-V6D Operating Instructions Manual

BLUETOOTH devices connected with
ˎ ˎ
this system must comply with the
BLUETOOTH specification prescribed
by the Bluetooth SIG, Inc., and must
be certified to comply. However, even
when a device complies with the
BLUETOOTH specification, there may
be cases where the characteristics or
specifications of the BLUETOOTH device
make it impossible to connect, or may
result in different control methods,
display or operation.
Noise may occur or the audio may
ˎ ˎ
cut off depending on the BLUETOOTH
device connected with this system,
the communications environment, or
surrounding conditions.
68
GB

Specifications

Amplifier section
Power output (rated):
Left/Right Channel: 320 W +
320 W (at 5 ohms, 1 kHz, 1% THD)
Power output (reference):
Left/Right Channel: 480 W +
480 W (per channel at 5 ohms,
1 kHz)
Subwoofer: 480 W (at 5 ohms,
100 Hz)
Speaker section
Speaker system: Tweeter + Mid range
speaker + woofer
Tweeter L/R: 40 mm cone type
Mid L/R: 100 mm cone type
Woofer: 250 mm cone type
Inputs
AUDIO IN/PARTY CHAIN IN L/R:
Voltage 2 V, impedance
47 kilohms
MIC 1, MIC 2:
Sensitivity 1 mV, impedance
10 kilohms
A (USB), B (USB) port:
Type A, maximum current:
500 mA
Outputs
AUDIO OUT/PARTY CHAIN OUT L/R:
Voltage 2 V, impedance
47 kilohms
VIDEO OUT:
Max. output level 1 Vp-p,
unbalanced, Sync. negative load
impedance 75 ohms