Sony MHC-V6D Operating Instructions Manual page 36

Transferring music from a disc
or USB device
You can easily transfer all the
music on a disc or USB A to USB B
(Synchronized Transfer). You can
also transfer a single track or audio
file during playback (REC1 Transfer).
1
Connect a USB device to the B
port.
USB device
Note
You can use a USB adaptor (not
supplied) to connect the USB device
to the unit if the USB device cannot be
plugged into the port.
2
Select the function.
Discs:
Press DVD/CD, then load the disc.
If the system starts playback
automatically, press  twice to stop
the playback fully.
USB:
Press USB repeatedly until "USB A"
lights up on the display, then
connect the USB device containing
audio files you want to transfer to
A port.
36
GB
3
Prepare the sound source.
Synchronized Transfer:
When playback is stopped, hold
down SHIFT, then press PLAY MODE
repeatedly to select the play mode
you want.
Note
If you start transferring in Shuffle Play,
Repeat Play or Program Play with no
steps, the selected play mode changes
to Normal Play automatically.
REC1 Transfer:
Select the track or audio file you
want to transfer, then start
playback.
4
Press REC TO USB B on the unit.
"PUSH ENTER" appears on the
display.
5
Press ENTER on the unit.
The transfer starts when
"DO NOT REMOVE" appears on the
display.
Do not remove the USB device until
the transfer is complete.
When the transfer is complete, the
system performs as follows:
Synchronized Transfer:
When the transfer is complete, the
disc or USB device stops
automatically.
REC1 Transfer:
The transfer is completed
automatically, but the disc or USB
device continues to play the next
track or file.
To stop transfer
Press .