Using Optional Equipment - Sony MHC-V6D Operating Instructions Manual

6
Press  /  repeatedly to select
the sound source you want,
then press
For Recording Timer, connect a USB
device to the B port after selecting
the sound source.
7
Press  to turn off the system.
Note
If the system remains on, the timers will
not take effect.
To check the timer setting or
activate the timer again
1
Hold down SHIFT, then press
TIMER MENU.
"TIMER SEL" flashes on the display.
2
Press .
3
Press  /  repeatedly to select
"PLAY SEL" or "REC SEL," then
press .
To cancel the timer
Repeat the same procedure as
"To check the timer setting or
activate the timer again" and select
"TIMER OFF" in step 3, then press
Notes
The system turns on before the preset
ˎ ˎ
time. If the system is already turned
on at the preset time or if "STANDBY"
flashes on the display, the Play Timer
and the Recording Timer will not be
activated.
Do not operate the system from the
ˎ ˎ
time the system turns on until the
playback or transfer starts.
54
GB
.
Using optional
equipment
1
Press VOL – repeatedly until
"VOLUME MIN" appears on the
display.
2
Connect an optional equipment
to AUDIO IN L/R jacks.
3
Press FUNCTION repeatedly to
select the audio in function
which corresponds to the
connected equipment.
4
Start playing the connected
equipment.
5
Press VOL + repeatedly to adjust
the volume.
Note
The system may enter standby mode
automatically if the volume level of the
connected equipment is too low. Adjust
the volume level of the equipment.
If you turn off automatic standby
function, see "Setting the automatic
standby function" (page 55).
.