Sony MHC-V6D Operating Instructions Manual page 63

Party Chain
Party Chain function cannot be
activated.
Check the connections
ˎ ˎ
(page 50).
Make sure the audio cords are
ˎ ˎ
connected correctly.
Adjust the volume.
ˎ ˎ
There is no sound when you select
the audio in function.
Adjust the volume on the
ˎ ˎ
connected equipment.
Try turning off the system, then
ˎ ˎ
turning it back on again.
"PARTY CHAIN" is flashing on the
display.
The audio in function is selected
ˎ ˎ
in the Party Chain function. Press
FUNCTION repeatedly to select
other function.
Try turning off the system, then
ˎ ˎ
turning it back on again.
To reset the system
If the system still does not operate
properly, reset the system to factory
default settings.
Use the buttons on the unit to
perform this operation.
1
Unplug the AC power cord, and
then plug it back in.
2
Press  to turn on the system.
3
Hold down  and BASS BAZUCA
at the same time for about 3
seconds.
"RESET" appears on the display.
All user-configured settings, such as
preset radio stations, timer, and the
clock are reset to factory default
setting.
Returning the "SETUP" settings
to the default
You can return the "SETUP" settings
(except for "PARENTAL CONTROL"
settings) to the default settings.
1
Hold down SHIFT, then press
SETUP.
2
Press  /  repeatedly to select
[SYSTEM SETUP], then press
3
Press  /  repeatedly to select
[RESET], then press
4
Press  /  repeatedly to select
[YES], then press
It takes a few seconds to complete.
Do not press  while resetting the
system.
.
.
.
63
GB