Using The Power Saving Function; (Hdmi Pass Thru); Setting The Audio Return Channel Function To Off - Sony 4-170-060-12(1) Operating Instructions Manual

Using the power saving
function

(HDMI PASS THRU)

If a "BRAVIA" Sync-compatible TV is
connected to the stand, and the TV is turned off,
HDMI signal transmission stops, and power
consumption is reduced.
The default setting is "AUTO."
Note
• This function is available only when "CTRL HDMI"
is set to "ON."
INPUT SELECTOR
CENTER SUBWOOFER
LEVEL
DISPLAY
RETURN
1
Press AMP MENU.
2
X/x
Press repeatedly until "SET HDMI"
appears, then press
3
X/x
Press to select "PASS THRU," then
press or c.
4
X/x
Press to select the setting.
• AUTO: When the TV is turned on while
the stand is in standby mode, the
stand outputs HDMI signals from
the stand's HDMI output jack. We
recommend this setting if you use
a TV that is compatible with
"BRAVIA" Sync. This setting
saves power in standby mode
compared with the "ON" setting.
• ON: When the stand is in standby
mode, the stand continuously
outputs HDMI signals from the
stand's HDMI output jack.
Lights up the POWER/ACTIVE
STANDBY indicator on the front
panel in amber.
AMP MENU
AMP
MENU
C, X, x, c,
MENU
or c.
Note
• When "AUTO" is selected, it may take a little
more time for the picture and sound to be output
to the TV than when "ON" is selected.
5
Press AMP MENU.
The AMP menu turns off.
Setting the Audio Return
Channel function to off
If the TV is compatible with the Audio Return
Channel (ARC) function, an HDMI cable
connection also sends a digital audio signal from
the TV. You do not need to make a separate
audio connection for listening to TV sound.
If you do not use the ARC function, connect the
stand and TV via digital optical cord and set
"ARC" to "OFF" in the AMP menu.
INPUT SELECTOR
CENTER SUBWOOFER
LEVEL
DISPLAY
RETURN
1
Press AMP MENU.
2
X/x
Press repeatedly until "SET HDMI"
appears, then press
3
X/x
Press repeatedly until "ARC"
appears, then press
4
X/x
Press to select "OFF".
• ON: The ARC function turns on.
• OFF: The ARC function turns off.
5
Press AMP MENU.
The AMP menu turns off.
Note
• When "CTRL HDMI" is set to "OFF," the ARC
function and its setting are not available.
AMP MENU
AMP
MENU
C, X, x, c,
MENU
or c.
or c.
27
GB