Polycom Kirk 4020 DECT Features Manual page 3

Polycom Kirk 4020 DECT Handset Feature Guide
 Press
button then dial *69
 The last incoming phone number is redialled
 To dial the last number you called, press the
< button and scroll using the < or > button to
select the desired number and then press the
button.
 Press
button then dial *66
 The last outgoing number is redialled
 Press
button then dial *78, wait for
confirmation, then hang-up
 Press
button then dial *79 wait for
confirmation, then hang-up
 Press
button then dial *67
 Dial the intended telephone number.
 Press
button then dial *65
 Dial the intended telephone number
 Press
button then dial *74, followed by
the single digit speed dial code [2-9]
 The speed dial number is dialled
 Press
button then dial *75, followed by
the prefix [ ] and the two digit speed dial
code [00 – 99]
 The speed dial number is dialled
 Press
button then dial *62
CLEAR VOICEMAIL MESSAGE WAITING
INDICATOR
 Press
button then dial *99
 Use the two buttons placed at the right side of
the handset for volume control
In the battery menu it is possible to see the
remaining battery capacity. For reading the
correct capacity, the handset has to be removed
from the charger for at least one hour.
 Press MENU and use the < or > buttons to
reach the Battery Menu
 Press
to enter the menu and you can see
the current status of the battery capacity
 Press
to return to the menu system or
press MENU to quit. The indication on the
display is not necessarily an exact reflection
on the remaining speech time.
To lock the handset keypad to prevent
accidental button presses

Press the MENU button then the
(display will show KEY LOCKED).
To unlock the handset keypad,
 Press the MENU button and then the
button again (display will show idle text).
The handset has a user-defined profile and a
mode where all sounds are disabled (SILENT).
Pressing the MENU button then the
will enter the profile setup where you can
configure the following various handset
functions: backlight, ring tone, ringer volume,
key click, vibrator, b-answer, start volume, out of
range indicator and auto key lock. To access
these functions use the < or > buttons and then
the button.
The handset also has a silent function. Pressing
the MENU button then the # will toggle the
SILENT mode. The display shows SILENT if the
SILENT mode is chosen.
button
button