Using A Headset - Aastra 6757i User Manual

Using a Headset

The 6757i accepts headsets through the modular RJ22 jack on the back of the phone. Contact your
telephone equipment retailer or distributor to purchase a compatible headset.
Advanced Volume Controls for the Headset Mic
On the 6757i, there are 3 options for the headset microphone volume. For more information about
the headset microphone, see
IP Phone UI
To change this volume:
1. Press
2. Select Preferences and press Select.
3. Use 2 to scroll down to Set Audio and press Select.
4. Press 2 to scroll down to Headset/Mic Volume and press Select.
5. Press 2 to scroll down to headset/mic volume and press Select.
6. Use 2 to scroll down the list to select your desired volume.
7. Press Enter to save the setting.
8. Press Done to save changes and exit.
9. If you do not wish to save changes, press Cancel to return to the previous screen.
To Make and Receive Calls Using a Headset
IP Phone UI
1. Ensure that you have selected a headset audio mode by accessing the Options list (under
option Preferences->Set Audio->Audio Mode on the IP Phone).
2. Plug the headset into the jack.
3. Press the
audio mode selected from the options menu, a dial tone or an incoming call is received on
either the headset or the handsfree speakerphone.
4. Press the
Model 6757i IP Phone User Guide
www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 4846
Note:
Customers should read and observe all safety recommendations contained in
headset operating guides when using any headset.
"Headset Mic Volume"
to enter the Options list.
Note:
By default, the volume for the headset microphone is set to medium.
key to obtain a dial tone or to answer an incoming call. Depending on the
key to end the call.
.
on page 35
153