Aastra 6757i User Manual page 122

Park/Pickup Key Configuration
The programmable method of configuration creates park and pickup keys that you can configure
on the 6757i phone.
You can set a key as "Park" or "Pickup" and then:
• specify a customized label to display on the Phone UI
• specify a value
• specify which line to use
• specify the state of the park and/or pickup keys
On the IP phone UI, the Park/Pickup feature displays the following:
• When a call comes in, and you pickup the handset, the custom label that you configured for
the Park key displays on the Phone UI.
• After the call is parked, the label that you configured for the Pickup key displays on other
phones in the network. You can then press the "Pickup" key, followed by the applicable
value to pickup the call on another phone in your network.
You can configure a Park and Pickup programmable configuration using the Aastra Web UI.
Key Configuration Using the Aastra Web UI
On the 6757i, you configure a Park and/or Pickup key at Operation->Softkeys and XML. You
enter a key label, and value for a specific line on the phone. The default state of the Park
configuration is "connected". The default state of the Pickup configuration is "idle, outgoing".
Note:
BroadWorks, Sylantro, ININ PBX. See the table
Configuration Values"
Configuring Park/Pickup using Key Configuration
Use the following procedure to configure the Park/Pickup call feature using the key
configuration method.
Aastra Web UI
Use the following procedure to configure a Park/Pickup key on the 6757i IP Phone. The
procedure shows the softkey screen as an example.
Note:
Server Configuration Values"
114
www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 4846
Applicable values depend on the server in your network (Asterisk,
on page 112.
For values to enter in the "Value" fields, see the table
on page
"Park/Pickup Call Server
"Park/Pickup Call
112.
Model 6757i IP Phone User Guide