Switch Ui Focus To Ringing Line - Aastra 6757i User Manual

Switch UI Focus to Ringing Line

You can configure a feature on the 6757i that controls the behavior of the phone when it receives
an incoming call when it is already in a connected call. When a call comes into the phone, and the
phone is already on a connected call, the phone switches focus to the ringing line to enable the user
to see who is calling them. You can turn off this functionality so that the phone stays focused on
the connected call. You can do this using the Switch Focus to Ringing Line parameter in the Aastra
Web UI.
Configuring "Switch Focus to Ringing Line" Using the Aastra Web UI
Aastra Web UI
Use the following procedure to enable or disable the "Switch Focus to Ringing Line" using the
Aastra Web UI.
Note:
"Switch Focus to Ringing Line" is enabled by default.
1. Click on Basic Settings->Preferences->General.
2. The "Switch Focus to Ringing Line" field is enabled by default. To disable this field,
uncheck the box.
3. Click to save your settings.
Model 6757i IP Phone User Guide 223
www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 4846