Table of Contents
Advertisement
Replace the cover. Slide the two pro-
2
trusions on the left side of the cover
into the two slots in the base (2).
3
Carefully lower the cover taking care
not to move the film. Snap the cover
closed by pressing the two push
marks on each side of the tab (3).
Loading mounted slides
Up to four mounted 35mm or APS slides
can be inserted into the slide mount hold-
er. The slide mounts must be between 1
mm and 2 mm thick to fit the holder. Glass
mounts cannot be used; the glass refracts
the light resulting in distorted and unevenly
illuminated scans.
Hold the slide mount holder so that the
slots are to the top and the frame numbers
are upside-down and face up. Insert the
slides into the holder emulsion side down.
The slide must be parallel with the length
of the holder otherwise the top and bottom
of the image area will be cropped.
21
Hide quick links:
Advertisement
Table of Contents
