Report Settings - Konica Minolta bizhub C450 Fax Manual

11

11.14 Report settings

You may select the report settings to be ON or OFF. This settings prints the
reports of communication management, communication result and reserva-
tion, and the input/output trays for the reports. If ON is selected, the manner
of printing may also be selected.
Item
Activity report
TX report
Sequential TX
report
Timer reserva-
tion TX Report
Confidential RX
report
Bulletin TX re-
port
Broadcast result
report
Paper tray for re-
*1 *2
ports
TX result report
check
*
: Indicates factory default setting.
*1
: Tray type may be different depending on the installed option.
*2
: Tray 1 is default, when the option is not installed.
!
Detail
Select ON in "TX Result Report Check" the TX report will be printed if YES
is selected. The report will not be printed if NO is selected.
11-66
Description
Determines whether to print the report and the
timing at which the report will be printed out.
Determines how to print the synchronous re-
sult report. If you select "All Dest.", all of the re-
ports will be printed out after all transmissions
are completed. If "1 Dest. at a time" is select-
ed, the report will be printed out after each
transmission.
Specifies the paper tray used to print out a re-
port.
Determines whether to display the transmis-
sion result report select screen. If you select
"ON", it will be displayed after each transmis-
sion.
Utility mode
Available value
*
OFF / Daily / Every 100
Comm. / 100/Daily
*
ON / If TX Fails / OFF
*
ON / OFF
*
ON / OFF
*
ON / OFF
*
ON / OFF
*
All Dest. / 1 Dest. at a time
*
Tray 1 / Tray 2 / Tray 3 /
Tray 4 / Bypass Tray
*
OFF / ON
C450