Closed Network Rx - Konica Minolta bizhub C450 Fax Manual

11

11.12.3Closed network RX

The closed area reception function can be enabled or disabled.
When set to ON, set the password used for the closed network RX by 4 dig-
its.
Closed area reception means that your FK-502 will receive the incoming data
only when the sender's password is valid. The FK-502 checks if the sender's
password is equal to that defined for your FK-502. If the two passwords are
different or the sender does not provide a password, a communication error
results.
Item
Closed Network
RX
* Indicates factory default setting.
11-46
Description
The closed area reception is the function
used to receive the incoming data only
when the sender's password is valid.
Utility mode
Available value
*
ON / OFF
The password is a number of
up to 4 digits.
C450