Header/Footer Position; Telephone Line Settings - Konica Minolta bizhub C450 Fax Manual

Utility mode

11.2.8 Header/Footer Position

Administrator Setting >> Fax Setting >> Header/Footer Position
Set the method of specifying the sender information and the reception infor-
mation. (page 11-31)
Item
Header Position
*1
Footer Position
*1
:
The displays are different depending on the country.

11.2.9 Telephone Line Settings

Administrator Setting >> Fax Setting >> Telephone Line Settings
Set items relevant to transmission and reception. (page 11-34)
Item
Dialing Method
*1
Receive Mode
Number of RX
Call Rings
Number of Redi-
*2
als
Redial Interval
Line Monitor
Sound
Line Monitor
Sound Volume
*1 :
The displays are different depending on the country.
*2
:
The line which can be set up is different depending on the country.
C450
Description
Set a position in which the sender information
is printed.
Set the reception time and the reception
number if they are printed or not on the docu-
ment received.
Description
Set the method of dialing.
Set to [Auto RX] for automatic reception. And
set to [Manual RX] when a lot of telephone calls
are made with an external telephone connect-
ed or when the remote reception function is
employed.
Set the number of receptions.
Set the number of the pseud-ringback tones
from the arrival of a message to the start of re-
ception.
Set the number of redials when no response is
available due to the other party being busy.
Set the intervals between the redials.
Set to ON when you want to hear the sound on
the line through the speaker while in transmis-
sion.
Set the sound volume of the speaker.
11
Available value
Inside Body Text / Outside
*
Body Text / OFF
Inside Body Text / Outside
*
Body Text / OFF
Available value
*
PB / 10pps
*
Auto RX / Manual RX
*
0-15 (2 times )
*
0-7 (3 times )
*
1-15 (3 min. )
*
ON / OFF
*
0-31 (16 )
11-9