Sequence Polling Reception Report - Konica Minolta bizhub C450 Fax Manual

12
12.7

Sequence polling reception report

The result of polling to multiple destinations is printed out automatically.
Automatic printout can be set to [ON] or [OFF] with [Sequential TX Report] at
[Report Settings] of utility mode. For details, see "Report settings" on
page 11-67.
*
The actual reports may be different from the reports in this manual.
Item
Destination:
Start Time:
Time:
Prints:
Result:
12-18
Description
The following is shown.
• Destination name when destination name is registered in abbreviated
dialing; and,
• Telephone number of destination.
The time at which communication started.
The required time for the communication is shown.
The number of pages transmitted.
OK Shown when communication ended normally.
S-OK Shown when communication was stopped.
PW-OFF Shown when the power switch is turned off.
TEL Shown when there has been an incoming tele-
phone call.
NG Shown when a communication error has oc-
curred.
Cont Shown when an error has occurred and the FK-
502 has switched to error page redialing.
No Ans Shown when the destination being called did not
answer.
Busy Shown when unable to complete communication
due to the line being busy.
M-Full Memory-full is shown when the fax file memory
became full during reception and reception
failed.
Explanation of reports and lists
C450