Transmission
4
Press [OK].
The fax screen will be restored.
5
Press [Scan Setting] - [Application] - [Number of Originals].
6
Enter the number of pages of the document from the keypad.
–
The number of originals can be set up to 999.
7
Press [OK] twice.
–
To stop Total page setting, press [Cancel].
The total number of pages is registered and you return to the fax
screen.
8
Set other functions if necessary.
–
See "Setting transmission conditions" on page 3-11 for setting
functions on the fax screen. See "Opening the scan setting screen
and comm. setting screen" on page 7-3 for setting functions on the
scan setting or comm. setting screen.
9
Designate the destination.
–
For details, refer to "Selecting one destination" on page 3-21.
10
Set the original document.
11
Press [Start].
The FK-502 reads the document and starts transmitting as each page
is scanned.
C450
3
3-45