Konica Minolta bizhub C450 Fax Manual page 214

10
–
Moves the cursor to the left.
–
Moves the cursor to the right.
– [Delete] :
The last character is cleared as it is pressed.
– [Outside]:
Displayed when [PBX CN Set] is set to [ON]. When a selection is
made, [E-] is displayed.
– Up to 38 digits can be entered.
– When an erroneous input is made, correct it by pressing [Delete] to
delete characters one at a time, or pressing [C] (clear) to delete all.
– When the PBX connection is [ON] and a call is made from the inter-
nal line to the outside line, press [Pause] after the outside line
number such as "0" so that dialing is made more surely. "P" is dis-
played on the screen.
7
To change the search character, press [Index] and then re-register the
search character.
– Press the search key of the search character you want to register
from among [ABC] - [etc].
– For a destination to which a message is sent frequently, specify the
search character and select [Main] at the same time. This allows
you to display it at the first place in the selection of the address
book.
– A character at the head of the Name is automatically set as the
search character.
8
Press [OK].
– To stop registering, press [Cancel].
Registration is performed and the registered destination is displayed
on a list.
9
Press [Close].
When proceeding with the registration of the address book, go to step
4.
10
Press [Exit] on the sub-area.
10-8
:
:
Registering/Settings
C450