Installation Precautions; Installation Site; Power Source - Konica Minolta bizhub 160f User Manual

Precaution
2 Precaution
Observe the following precautions to maintain the machine in its best possi-
ble condition.
2.1

Installation precautions

Installation site

To ensure utmost safety and prevent possible malfunctions, install the ma-
chine in a location that meets the following requirements:
- A location away from curtains, etc. that may catch fire and burn easily
- A location that is not exposed to water or other liquids
- A location free from direct sunlight
- A location out of the direct airflow of an air conditioner or heater, and not
exposed to extremely high or low temperatures
- A well-ventilated location
- A location that is not exposed to high humidity
- A location that is not extremely dusty
- A location not subjected to undue vibrations
- A stable and level location
- A location where ammonia or other organic gases are not generated
- A location that does not put the operator in the direct airflow of exhaust
from the machine
- A location that is not near any kind of heating devices

Power source

The power source requirements are as follows.
- Voltage fluctuation:
AC 110 V - 127 V -10%, +6%, or AC 220 V - 240 V ±10%
- Frequency fluctuation:
Within ±2.5 Hz
Use a power source with as few voltage or frequency fluctuations as possi-
ble.
bizhub 160f
2
2-3