When Incorrect Copies Are Produced - Konica Minolta bizhub 160f User Manual

8
8.10

When incorrect copies are produced

Symptom
The image is too light.
The image is too dark.
The copy is blurry.
8-30
Possible cause
The density level for the Auto
setting is set to "LIGHT".
The density level is set to light.
Does the message TONER
EMPTY appear in the dis-
play?
The paper is damp.
The density level for the Auto
setting is set to dark.
The density level is set to
dark.
The original glass surface is
dirty.
The original is not held tightly
against the original glass.
The paper is damp.
When a message appears
Action
Adjust the setting for DENSI-
TY LEVEL (A) in the utility
mode. (p. 7-23)
Otherwise, cancel the "Auto"
density setting, and then man-
ually select the desired densi-
ty setting. (p. 4-12)
Press the [)] key, and then
select a darker copy density.
(p. 4-12)
Change the toner cartridge
with a new one. (p. 8-7)
Change the paper.
Adjust the setting for DENSI-
TY LEVEL (A) in the utility
mode. (p. 7-23)
Otherwise, cancel the "Auto"
density setting, and then man-
ually select the desired densi-
ty setting. (p. 4-12)
Press the [*] key, and then
select a lighter copy density.
(p. 4-12)
Wipe the original glass clean
with a soft, dry cloth.
Place the original in position
so that it is held tightly against
the original glass.
Change the paper.
bizhub 160f