Replacing The I/O Board; Procedure; Post-Requisites - Dell Alienware 17 R2 Service Manual

Replacing the I/O board

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your
computer, follow the instructions in
Computer. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.

Procedure

1 Align the ports on the I/O board with the slots on the computer base.
2 Align the screw holes on the I/O board with the screw holes on the
computer base.
3 Replace the screws that secure the I/O board to the computer base.
4 Connect the I/O-board cable to the I/O board.
5 Connect the subwoofer cable to the I/O board.

Post-requisites

1 Follow the procedure from step 5 to step 11 in "Replacing the
2 Replace the base
68
Computer. After working inside your
panel.
After Working Inside Your
palm rest".