Replacing The Power-Button Board; Procedure; Post-Requisites - Dell Alienware 17 R2 Service Manual

Replacing the power-button
board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your
computer, follow the instructions in
Computer. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.

Procedure

1 Align the screw holes on the power-button board with the screw holes
on the palm-rest assembly.
2 Replace the screws that secure the power-button board to the palm-rest
assembly.
3 Connect the power-button board cable to the power-button board.
4 Slide the touch-pad cable and the status-light cable into their respective
connectors on the power-button board and press down the latches to
secure the cables.

Post-requisites

1 Follow the procedure from step 5 to step 11 in "Replacing the
2 Replace the
44
base panel.
Computer. After working inside your
After Working Inside Your
palm rest".