Replacing The Display; Procedure; Post-Requisites - Dell Alienware 17 R2 Service Manual

Replacing the display back-
cover
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your
computer, follow the instructions in
Computer. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.

Procedure

NOTE: This chapter is applicable only if you have purchased a laptop
with non-touchscreen display.
1 Replace the AlienFX Alienhead board.
2 Replace the AlienFX Display light.
3 Adhere the display-board and camera cable to the display back-cover.
4 Route the display-board cable through the routing guides on the display
back-cover.
5 Connect the camera cable to the camera module.

Post-requisites

1 Replace the Alienware AlienHead LED
2 Replace the display-panel AlienFX
3 Replace the camera.
4 Replace the display
5 Replace the display
6 Replace the display
7 Follow the procedure from step 5 to step 11 in "Replacing the
8 Replace the wireless
9 Replace the base
134
Computer. After working inside your
LEDs.
panel.
bezel.
assembly.
card.
panel.
After Working Inside Your
board.
palm rest".