Removing The Alienware Alienhead Led Board; Prerequisites; Procedure - Dell Alienware 17 R2 Service Manual

Removing the Alienware
AlienHead LED board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your
computer, follow the instructions in
Computer. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.

Prerequisites

1 Remove the
2 Remove the
3 Follow the procedure from step 1 to step 9 in "Removing the
4 Remove the
5 Remove the
6 Remove the

Procedure

1 Peel off the mylar that secures the display-board cables and the display-
panel AlienFX LEDs to the display back-cover.
2 Disconnect the camera cable from the camera module.
base panel.
wireless card.
display assembly.
display bezel.
display panel.
Computer. After working inside your
After Working Inside Your
palm rest".
127