Advertisement
Chair adjustments
Chair height adjustment
Two-hole castor forks (Fig. 41)
allow you to interchange 127mm
(5"), 152mm (6") and 203mm (8")
castor wheels and to adjust the
seat height. To adjust, remove the
13mm A/F axle bolt (1) and nut (2)
with 13mm A/F spanners and
remove the castor wheel (3). Either
change the castor wheel size and/
or position the castor wheel upward
or downward in the desired pre-
drilled holes (4) 25mm (1") apart on
the castor fork (5). Replace the bolt
and tighten to 27Nm torque. Follow
castor angle adjustment.
Inside mounted castors
To inside mount the castors
(Fig. 42), reverse the positions of
the castor assemblies. Remove
the castor assemblies (1) from the
frame (noting their positions).
Inside mount the right castor on the
left side and the left castor on the
right side. For correct refitting follow
the instructions Castor angle
adjustment, ensuring that the
castors are at the correct angle and
the retaining nuts and bolts are
tightened to the correct torque
setting 8-10Nm.
Issue 2
2
3
Fig. 41
1
Fig. 42
31
5
4
1
RX Kidz
Advertisement
