Advertisement
Chair adjustments
Footplate height adjustment
Angle adjustable footplate
To adjust the footplate (1) height,
loosen the screw (2), located as
shown, with a 4 mm Allen key and
set the footplate height to the
required position. Tighten using the
Allen key to a torque setting of
5-8Nm (Fig. 29).
Footplate angle adjustment
Angle adjustable footplate
To adjust the footplate angle
(Fig. 30), loosen the screws (1) with
a 4mm Allen key sufficiently to
allow the footplate to be rotated to
the required angle. When at the
required angle tighten the Allen
screws using a torque spanner to
8-10Nm torque setting.
Footplate depth adjustment
To adjust the depth of the footplate
(Fig. 30), remove the two screws
(1) and relocate the footplate to the
desired depth position through the
choice of a different set of holes (2)
Refit the screws and tighten to the
settings given above.
RX Kidz
Fig. 29
Fig. 30
24
2
1
1
2
Issue 2
Advertisement
