Advertisement
Chair adjustments
Anti-tip tubes
Press the rear (Fig. 27) anti-tip
release lever (1) on the anti-tip tube
(2) so that both locking pins (3) are
drawn into the tube, and insert it
into the anti-tip tube receiver (4).
Ensure the two locking pins are
located and locked into the receiver
mounting holes.
Turning anti-tip tubes
In some instances it can be wise to
rotate the tubes through 180
(Fig. 27), hold the release pins (1)
in and rotate the tubes through
O
180
, allowing the locking pins (3)
to click into position.
Footplate height adjustment
To adjust the footplate (1) height,
loosen the screw (2), using a 4mm
Allen key located as shown
(Fig. 28), and set the footplate
height to the required position.
Tighten the screw to 5-8Nm torque.
Issue 2
O
Fig. 27
Fig. 28
23
2
1
3
4
1
3
1
2
RX Kidz
Advertisement
