Rinses; Unit For Amount Of Water - Jura ENA Micro 9 One Touch Instructions For Use Manual

4 Permanent settings in programming mode
k T Press the Rotary Switch to confirm the
setting.
, the switch-off time is set.
OK
OFF AFTER
g T Turn the Rotary Switch until
displayed.
k T Press the Rotary Switch to exit programming
mode.
READY

Rinses

In the program item
RINSES
following settings:
U
INIT RINSE MANUAL
U
The switch-on rinse must be started
manually.
U
INIT RINSE AUTOMATIC
U
The switch-on rinse is started automatically.
U
C-RINSE AFTER 10'
U
You are prompted to perform a cappuccino
rinse 10 minutes after preparation of a
specialty coffee with milk.
U
C-RINSE NOW
U
You are prompted to perform a cappuccino
rinse immediately after preparation of a
specialty coffee with milk.
Example: Change the setting such that cappuccino
frother rinsing is performed immediately after
preparation of a specialty coffee with milk.
Precondition:
READY
k T Press and hold the Rotary Switch until
appears.
RINSE
g T Turn the Rotary Switch until
displayed.
k T Press the Rotary Switch to enter the
program item.
INIT RINSE
g T Turn the Rotary Switch until
displayed.
k T Press the Rotary Switch to enter the
program item.
AFTER 10'
g T Turn the Rotary Switch until
displayed.
20
is
EXIT
you can make the
is displayed.
RINSES
C-RINSE
is
NOW
k T Press the Rotary Switch to confirm the
setting.
OK
C-RINSE
g T Turn the Rotary Switch until
displayed.
k T Press the Rotary Switch to exit the program
item.
RINSES
g T Turn the Rotary Switch until
displayed.
k T Press the Rotary Switch to exit programming
mode.
READY

Unit for amount of water

The water volume is given as standard in
can change this setting to
mode.
Example: Change the unit for the amount of water
from to
OZ ML
Precondition:
k T Press and hold the Rotary Switch until
RINSE
g T Turn the Rotary Switch until
displayed.
k T Press the Rotary Switch to enter the
program item.
OZ
g T Turn the Rotary Switch until
k T Press the Rotary Switch to confirm the
setting.
is , the unit for the amount of water is set.
OK
DISPLAY
g T Turn the Rotary Switch until
displayed.
k T Press the Rotary Switch to exit programming
is mode.
READY
EXIT
EXIT
in programming
ML
.
is displayed.
READY
appears.
DISPLAY
ML
EXIT
is
is
. You
OZ
is
is displayed.
is