Rinses; Restore Factory Settings - Jura IMPRESSA XJ5 Professional Instructions For Use Manual

Permanent settings in programming mode

Rinses

Restore factory settings

In the programme item
settings:
U
MANUAL
U
The switch-on rinse must be started manually.
U
AUTOMATIC
U
The switch-on rinse is started automatically.
Example: Proceed as follows to specify that the switch-on rinse
should be started manually.
Precondition:
READY
k T Press and hold the Rotary Switch until
RINSE
g T Turn the Rotary Switch until the programme item
is displayed.
RINSING
k T Press the Rotary Switch.
AUTOMATIC
g T Turn the Rotary Switch until
k T Press the Rotary Switch.
appears briefly on the display.
OK
RINSING
g T Turn the Rotary Switch until
k T Press the Rotary Switch to exit programming mode.
READY
In the programme item
their factory settings:
U
PRODUCT
U
The settings (e.g. amount of water and temperature) for any
product can be reset individually to the factory settings.
U
ALL PROD.
U
The settings (e.g. amount of water and temperature) for all
products are reset to the factory settings.
U
RESET.ALL
U
All user settings (apart from the 'filter' and 'water hardness')
are reset to factory settings. Your IMPRESSA then switches
off.
Example: Proceed as follows to reset the values for espresso to the
factory settings.
Precondition:
READY
you can make the following
RINSING
is displayed.
MANUAL
is displayed.
EXIT
you can reset various settings to
RESET
is displayed.
appears.
RINSE
is displayed.