Mark Shape - Furuno GP-1650 Operator's Manual

ADD/EDIT/MOVE WAYPOINTS
LOCAL LIST
ALPHA/NUMERIC LIST
WAYPOINT BY CURSOR
WAYPOINT BY RANGE & BEARING
DGPS 3D
Figure 5-4 waypoint menu
3. Press the soft key WAYPOINT BY CUR-
SOR. The plotter display appears.
4. Operate the cursor pad to place the cur-
sor on the location desired.
5. Press the soft key NEW WPT. The
waypoint window appears and it shows
mark shape, waypoint name, comment
(default: date), position of waypoint and
proximity alarm radius.
MARK NAME
0 0 1 WPT
COMMENT
17:38 01SEP97
LAT
34 12. 345' N
LON
135 12. 3457' W
PROXIMITY
0.00 nm
ALARM RADIUS
DGPS 3D
Figure 5-5 Waypoint window
6. If you do not need to change the waypoint
data, simply press the soft key SAVE to
register the waypoint and return to the
plotter display. Be sure to press the soft
key SAVE only after changing all data.
5-2
Changing the shape and color of
WPT
waypoint mark
1. Press the soft key SELECT MARK.
2. Press the soft key MARK SHAPE to open
the mark shape selection window.
RETURN
Figure 5-6 Mark shape selection window
NEW
3. Operate the cursor pad to select shape
WPT
desired.
SELECT
MARK
4. Press the soft key ENTER or the [ENTER]
COORD
TYPE
key.
N<-->S
E<-->W
5. Press the soft key SELECT MARK.
SAVE
6. Press the soft key MARK COLOR to open
the mark color selection window.
RETURN
Figure 5-7 Mark color selection window
7. Press
and then press the soft key ENTER or the
[ENTER] key.

MARK SHAPE

SELECT COLOR
RED
'
™ YELLOW
™ GREEN
™ LIGHT BLUE
™ PURPLE
™ BLUE
™ WHITE
or to select the color desired,