Erasing Event Marks; Setting Event Position As Destination; Changing Event Mark Shape; The Mob Function - Furuno GP-1600F Operator's Manual

2.22 Erasing Event Marks

2.23 Setting Event Position as Destination

2.24 Changing Event Mark Shape

2.25 The MOB Function

2 – 24
1) Press the [CURS] key to turn on the cursor.
2) Press the [Arrow] keys to place the cursor on the event mark
you want to erase.
3) Press the [CLR] key.
1) Press the [GOTO] key. (If the EVENT List appears, go to step
5.)
2) Press the [MENU ESC] key.
3) Press the [ ] or [ ] key to select EVENT List.
4) Press the [NU/CU ENT] key. The event list appears.
5) Operate the [ ] or [ ] keys to select an event number.
6) Press the [NU/CU ENT] key.
1) Press the [MENU ESC] key.
2) Press the [2] key to select TRACK/MARK SETUP.
3) Press the [Arrow] keys to select EVENT MARK and shape
desired.
5) Press the [MENU ESC] key to close the menu.
The MOB (Man OverBoard) function can be enabled on the DIS-
PLAY SETUP menu. When enabled, the [EVENT MOB] key func-
tions to mark man overboard position. The range and bearing to
the MOB position are continuously updated on the display, to help
you navigate to the MOB position.
Entering MOB mark
Press the [EVENT MOB] key over 3 seconds.