Camera Setup; Camera Setup Operation; Direct Camera Setting; Setting The Camera Input - Alpine X800D-U Owner's Manual

Camera Setup

Camera Setup Operation

With an optional camera connected, its video is output to the monitor.
When the camera is connected, set this item.
The following steps 1 to 5 are common operations to each
"Setting item" of Camera Setup. Refer to each section for
details.
1
Touch [Setup] icon of Top banner.
The Setup main screen is displayed.
2
Touch [ (CAMERA)].
The Camera Setup screen appears.
3
Select the desired item.
Setting items: Direct Camera / AUX Camera / Camera Interrupt
(Power OFF Mode) / Reverse Mute
4
Touch [ ] or [ ] etc., to change its setting.
• When the pop-up window for setup is displayed, touch [
close the window after setting.
5
Touch [ ] to return to the previous screen.
• Immediately after changing the Camera Setup (while the system is
writing data automatically) do not turn the ignition key to OFF.
Otherwise, the settings may not be changed.
• For details on how to scroll through the list, refer to "Selecting an
Item in a List" (page 29).
68
-EN

Direct Camera Setting

[Direct Camera] is selected on the Camera setup menu in step 3.
Refer to "Camera Setup Operation" (page 68).

Setting the Camera Input

Setting item: Camera Select / Guide Adjustment*
Setting contents: Off (Initial setting) / Front / Rear*
Front: Front camera
Rear: Rear camera
1
* If "Camera Select" is set to "Off", this option is not available.
2
* If "Camera Select" in AUX Camera Setting is set to "Rear", "Rear"
cannot be set in Direct Camera Setting.
Switching video patterns for Rear camera & Front
camera
The video pattern can be changed when connected to HCE-C200R/
HCE-C200F/HCE-C210RD/HCE-C212F.
Setting item: Guide Adjustment
1
Touch [Guide Adjustment].
The camera guide adjustment screen is displayed.
2
Touch [Back], [Panorama], [Corner], or [Top].
The view will change to the selected view.
• [Back] will not appear for the Front camera.
3
Touch [
• For an explanation of video patterns, see the camera Owner's
Manual.
Adjusting the Rear/Front Camera Guide
If you select "Rear" or "Front", you can adjust the camera guide
] to position.
Setting item: Guide Adjustment
1
Touch [Guide Adjustment].
The camera guide adjustment screen is displayed.
• If the video pattern is set to "Corner", the camera guide will
not be displayed.
2
Touch [Adjust].
• If [Adjust] does not appear, proceed to step 3.
3
Touch the guide you intend to adjust.
Guide line can also be selected by touching [
] to return to the previous screen.
1
2
] [ ].