Setting The External Audio Processor On/Off; Setting The Digital Output; Sound Setup; Sound Setup Operation - Alpine X800D-U Owner's Manual

Setting the External Audio Processor
On/Off
[External AP] is selected on the General setup menu in step 3. Refer to
"General Setup Operation" (page 47).
When a compatible external audio processor is connected, please set
this item to "On".
Setting item: External AP
Setting contents: Off (Initial setting) / On
Off: The connected audio processor is not
recognised by X800D-U/INE-W987D.
On: The connected audio processor is recognised
by X800D-U/INE-W987D.
• Some items of Sound Setup cannot be adjusted from this unit when
External AP is set to On.
• Press and hold /AUDIO button is invalid when External AP is set
to On .

Setting the Digital Output

[Optical] is selected on the General setup menu in step 3. Refer to
"General Setup Operation" (page 47).
To connect an audio processor using optical digital output, set to "On"
by the following procedure.
Setting item: Optical
Setting contents: Off (Initial setting) / On
• This setting is available only when External AP is set to On. Refer to
"Setting the External Audio Processor On/Off" (page 53).
• If Optical is set to On, the Optical (
MUTE
• , and buttons are invalid when Optical is set to On.

Sound Setup

Sound Setup Operation

1
2
3
) indicator appears.
Setting items: Balance/Fader/Subwoofer
4
5
• Immediately after changing the Sound Setup (while the system is
• For details on how to scroll through the list, refer to "Selecting an
• When BASS ENGINE SQ mode is selected or TuneIt is launched,
The following steps 1 to 5 are common operations to each
"Setting item" of Sound Setup. Refer to each section for details.
Touch [Setup] icon of Top banner.
The Setup main screen is displayed.
Touch [Sound].
The Sound Setup screen appears.
Select the desired item.
1
*
EQ Presets / Parametric EQ
Time Correction *
Source Volume Setup
1
* These items cannot be adjusted when External AP is set to On,
refer to "Setting the External Audio Processor On/Off"
(page 53).
2
* This item cannot be adjusted when Optical is set to On, refer to
"Setting the Digital Output" (page 53).
Touch [ ] or [ ] etc., to change its setting.
• When the pop-up window for setup is displayed, touch [
close the window after setting.
Touch [ ] to return to the previous screen.
writing data automatically) do not turn the ignition key to OFF.
Otherwise, the settings may not be changed.
Item in a List" (page 29).
some setting items are not adjustable. Refer to "BASS ENGINE SQ
mode" (page 26)/"Applying TuneIt" (page 31).
1 1
* / Media Xpander *
1
*
/
1 1 1
/ X-OVER * / Defeat * / Volume /
2
*
] to
53
-EN
/