Setup; Setup Operation; General Setup; General Setup Operation - Alpine X800D-U Owner's Manual

Setup

Setup Operation

Touch the [Setup] icon on the Audio/Visual Playback screen to display
the Setup main screen.

General Setup

General Setup Operation

The following steps 1 to 5 are common operations to each
"Setting item" of General Setup. Refer to each section for
details.
1
Touch [Setup] icon of Top banner.
The Setup main screen is displayed.
2
Touch [General].
The General Setup screen appears.
[Setup] icon
3
Select the desired item.
Setting items: Language / Remote Sensor *
Remove Screen Angle / Security Code / Top/
Bottom Banner Fade Out / Screen/
LED Customize / Visual / About / Installation /
Parking Assist Interrupt *
External AP / Optical *
1
* Displayed only when RSE is On. (Page 64)
2
* Depending on your vehicle, this function may not be supported.
3
* Available only when External AP is On. (Page 53)
• Depending on the item, repeat step 3.
4
Touch [ ] or [ ] etc., to change its setting.
• When the pop-up window for setup is displayed, touch [
close the window after setting.
5
Touch [ ] to return to the previous screen.
• Immediately after changing the settings of General Setup (While the
system is writing data automatically) do not turn the ignition key to
OFF. Otherwise, the settings may not be changed.

Language Setting

Touch [Language] on the General setup menu in step 3. Refer to
"General Setup Operation" (page 47).

Setting the Scroll

Scroll display is available if CD text, folder name, file name or tag
information is entered.
Setting item: Auto Scroll
Setting contents: Off / On (Initial setting)
Off: Turns off the scroll mode.
On: Turns on the Auto scroll mode. Scroll display is repeated
as long as the mode is turned on.
1
/ Auto Open/Close /
2
/ Climate Interrupt /
3
] to
47
-EN