Aux Camera Setting; Setting The Camera Input - Alpine X800D-U Owner's Manual

Display example for rear camera mode
Display example for front camera mode
4
Touch [ ], [ ], [ ] or [
the guide.
• Touching [Clear] clears adjustments and returns to the setting
before guide line alteration.
5
After the adjustment is completed, touch [Set].
Adjusting guides simultaneously (for Rear camera
only)
Touch [Link].
The 3 vertical guides of the currently-selected guide link
together, allowing them to be adjusted simultaneously.
] to adjust the position of
Turning guide display ON/OFF
Turning the selected guide off.
1
Touch [ON/OFF].
The currently selected guide will turn off.
2
To turn the guide on, touch [ON/OFF] again.
• Guides that are turned off are still adjustable.
Returning guides to default.
1
Touch [Default].
A message window will appear.
2
Touch [OK].
Adjusted values will return to default settings.

AUX Camera Setting

[AUX Camera] is selected on the Camera setup menu in step 3.
Refer to "Camera Setup Operation" (page 68).

Setting the Camera Input

Setting item: Camera Select / Camera Signal*
1
Adjustment*
Setting contents: Off (Initial setting) / Rear*
Rear: Rear camera
OTHER: Side camera, Room camera, etc.
1
* If "Camera Select" is set to "Off", this option is not available.
2
* If "Camera Select" in Direct Camera Setting is set to "Rear",
"Rear" cannot be set in AUX Camera Setting.
Setting the AUX Camera Signal Input
When the AUX camera is connected, the video input signal type can be
chosen.
Further setting item: Camera Signal
Setting contents: NTSC (Initial setting) / PAL
1
/ Guide
2
/ OTHER
69
-EN