Table of Contents
Advertisement
8. Connecting Audio-Components to the
DVD Player
In addition to sound reproduction of DVDs/VCDs/S-VCDs,
as well as audio and MP3-CDs by way of ...
•
the speakers of the television to which the DVD Player is
connection, or
... the sound can also be reproduced by external audio com-
ponents such as HiFi systems, Dolby Digital/DTS receivers or
surround-sound systems.
The following possibilities are available:
.. Connecting a HiFi system
To play DVDs, VCDs/S-VCDs, audio and MP3-CDs with the
DVD Player and enjoy the experience of a full sound, a HiFi
system can be connected to the DVD Player. Before actually
connecting the DVD Player, please refer to the operating
instructions for the given HiFi system to check ...
•
Whether the HiFi system is suitable for connection to a
DVD Player. If yes ...
•
Whether the HiFi system has chinch sockets. If yes ...
Proceed as follows to connect the DVD Player to a hifi
system ...
1
Insert the white plug of the chinch cable in the "L" chinch
socket on the back of the DVD player.
2
Insert the white plug on the other end of the chinch ca-
ble in the chinch socket for the left channel on the HiFi
system.
3
Insert the red plug of the chinch cable in the "R" chinch
socket at the back of the DVD Player.
4
Insert the red plug on the other end of the chinch cable
in the chinch socket for the right channel on the HiFi
system.
5
Refer to the operating instructions to fi nd out whether
any settings have to be made on the HiFi system to repro-
duce the sound of a DVD, VCD/S-VCD, Audio- or MP3-CD
by HiFi system.
Please note:
For an optimal sound experience set up the speakers
of the HiFi system to the right and left of the television
to which the DVD Player is connected.
If the DVD Player has been connected to the televi-
sion with a SCART cable, then the audio signals will
be transmitted both via the chinch cable to the HiFi
system and via the SCART cable to the television. In
this case set the minimum sound volume on the tel-
evision if the sound is to be reproduced by the HiFi
system.
.. Connecting digial audio components via
digital cables
To enjoy stereophonic sound with DVDs, VCDs/S-VCDs or
audio CDs (distinguishable by the Dolby Digital or DTS logo),
the DVD Player can be connected to digital audio compo-
nents – e.g. a Dolby Digital or DTS receiver, and a suitable
surround-sound system.
The necessary cables for the subsequently described con-
nection method are available from your local dealer.
Check the operating instructions for the given audio compo-
nent whether it can be connected to a DVD Player ...
•
with a coaxial cable
•
with an optical cable
Silvercrest KH 6508/KH 6509
- Quick Links:
- Technical Data
Hide quick links:
Advertisement
Table of Contents
