Single Frame Forward (Step); Enlarging The Picture (Zoom); Changing The Camera Angle (Angle); Subtitle Fade-In/Fade-Out - Silvercrest KH 6508 Operating Instructions Manual

• Once for half the playback speed (compared to normal
playback speed); " 1/2" is displayed on the television
screen.
• Twice for one-fourth of the playback speed; " 1/4" is
displayed on the television screen.
• Three times for one sixth of the playback speed; " 1/6" is
displayed on the television screen.
• Four times for one seventh of the playback speed; " 1/7"
is displayed on the television screen.
For slow playback Return press the "S.RWD" button dur-
ing playback...
• Once for half the playback speed; " 1/2" is displayed on
the television screen.
• Twice for one-fourth of the playback speed; " 1/4" is
displayed on the television screen.
• Three times for one sixth of the playback speed; " 1/6"
is displayed on the television screen.
• Four times for one seventh of the playback speed; " 1/7"
is displayed on the television screen.
Please note:
Sound is not reproduced during slow playback.
2 To continue fi lm playback at the selected point in normal
speed, press once the "Play" button on the front of the
DVD Player or on the remote control " Play" is once again
displayed on the television screen.

Single Frame Forward (Step)

Please note:
This function may not be available on all DVDs/VCDs/
S-VCDs! If you try to carry out a function that is not
available, then the symbol
evision screen.
Proceed in the following manner to advance a fi lm of a loaded
DVD/VCD/S-VCD forward, frame-by-frame ...
1 Press during play the "Pause/Step" button once to stop
play. The still picture of the chapter stopped, is displayed
on the television screen.
2 The still picture will then be advanced frame-by-frame
each time the "Pause/Step" button is depressed.
3 To return to fi lm play press once the "Play" button on
the front of the DVD Player or on the remote control.
is displayed on the tel-

Enlarging the picture (Zoom)

Please note:
This function may not be available on all DVDs/VCDs/
S-VCDs! If you try to carry out a function that is not
available, then the symbol
evision screen.
While the fi lm on the loaded DVD/VCD/S-VCD is being
played it is possible to enlarge the picture on the televi-
sion screen in three stages by pressing on the "Zoom"
button on the remote control ...
• Once for the fi rst enlargement stage; " 1" is displayed
on the television screen.
• Twice for the second enlargement stage: " 2" is displayed
on the television screen.
• Three times for the third enlargement stage; " 3" is dis-
played on the television screen.
To turn off the zoom function and return to a normal picture
size, press the "Zoom" button a fourth time; "
played on the television screen.

Changing the camera angle (Angle)

Please note:
This function may not be available on all DVDs/VCDs/
S-VCDs! If you try to carry out a function that is not
available, then the symbol
evision screen.
Some fi lms on DVD/VCD/S-VCD contain chapters which
were shot at diff erent camera angles. When fi lms contain
such chapters then the same chapter can be watched from
diff erent angles.
Press the "Angle" button on the remote control while the fi lm
of the loaded DVD/VCD/S-VCD is being played; the angle is
changed each time the "Angle" button is depressed.

Subtitle fade-in/fade-out

Please note:
This function may not be available on all DVDs/VCDs/
S-VCDs! If you try to carry out a function that is not
available, then the symbol
evision screen.
If the fi lm of the loaded DVD/VCD/S-VCD has subtitles, then
these can be displayed on the television screen by pressing
the "Subtitle" button on the remote control.
is displayed on the tel-
Off " is dis-
is displayed on the tel-
is displayed on the tel-
Silvercrest KH 6508/KH 6509 