Starting The Dvd Player; Inserting The Dvd - Silvercrest KH 6508 Operating Instructions Manual

9 Select the "Rear" option for the rear audio channels of
audio components by pressing the control button
once.
10 Press the "OK" button once to select from the available
settings:
• "Large" if large rear speakers have been connected to the
audio component.
Please note:
If the "Small" setting is selected in the "Front" option,
then the "Large" setting for the rear speakers can no
longer be selected. You can select "Large" for the rear
speaker, if the subwoofer is setting "On".
• "Small" when small rear speakers are connected to the
audio component.
• "Off " it you want to turn off the audio channels for the
rear speakers or when no speakers are connected to the
audio component.
Having selected a setting for "Rear", proceed in the fol-
lowing manner:
12 Select the "Subwoofer" option for the subwoofer channel
of the audio component by pressing the control button
once.
13 Press the "OK" button to select between the available
settings:
• "On" if a subwoofer is connected to the audio compo-
nent.
• "Off " to turn off the audio channel for the subwoofer or
when no subwoofer has been connected to the audio
component.
Please note:
If you have selected the "Small" setting in the "Front"
option, then the "Off " setting cannot be selected for
the subwoofer.
If the "Off " setting has been selected for the "Center",
"Rear" and "Subwoofer" options, then sound is only
reproduced by two channels (stereo). This equals the
works setting for Stereo-Downmix.
Having selected for "Subwoofer", thereby concluding all
settings in the "Size" menu sub-item, proceed in the fol-
lowing manner:
14 Leave the "Audio" menu sub-items by pressing the control
button four times.

10. Starting the DVD Player

Having ...
• set up the DVD Player at an appropriate point
• connected the DVD Player to the television (or video pro-
jector) with one of the listed connecting facilities
• connected the DVD Player (if required) to an HiFi or sur-
round-sound system or a Dolby Digital or DTS Receiver
• ensured that the remote control is operational by loading
the batteries
• and know how to call and operate the settings menu
with the remote control
... then the DVD-Player will be ready to operate
. Inserting the DVD
To play a disc with the DVD player:
1 Switch on the television connected to the DVD player.
2 Make certain that the DVD player is ready for operation
and switched on.
If the television, the DVD-Player and any other possibly co-
nected appliances (e.g. an audio component) are ready and
on and the DVD-Player is correctly connected to the televi-
sion, the Silvercrest logo will appear on the TV screen.
If no disc is inserted in the disc compartment of the DVD-
Players: The message „No disc" apears on the TV screen.
3 Open the disc compartment by pressing the button
„Open/Close" on the remote control or the button on
the front of the DVD-Player once. " Open" will appear on
the TV screen.
4 Place the disc into the DVD compartment with the writ-
ing/label facing up. For twin-sided discs:
The side you would like to play must face down.
5 After having inserted the disc: press the button „Open/
Close" on the remote control or the button on the front of
the DVD-Player again to close the disc compartment.
6 The contents of the will will now be loaded; this may take
a few seconds. In the meantime the message „Loading"
appears on the TV screen.
Silvercrest KH 6508/KH 6509 