Hinge Assembly - Sony Handycam Vision CCD-TRV107E Service Manual

CCD-TRV107E/TRV108E/TRV208E/TRV408E
2-12.MECHANISM DECK

2-13.HINGE ASSEMBLY

(Remove the LCD unit reffering to section 2-2 before starting disassembly.)
A
2 Hinge blind
1 Tapping
screw (B2 × 5)
qs Hinge assembly
qa Control switch block
(PR-10000)
3 Control switch block
(FK-2000)
2 Claw
6 Mechanism deck
5 MD frame (A)
A
4
3 Four tapping
screws (B2 × 5)
7 Hinge cover M
q; Screw
9 Harness
(M1.7 × 2.5)
(PD-115)
2-12
1 Screw
(M2 × 3),
lock ace, p2
HARNESS PROCESSING
OF THE HINGE ASSEMBLY
Attach the harness clamp
so that the black harness (6P)
comes to the forefront.
Be sure that each harness
does not go across the ribs
of the guide.
8 Harness
clamp
6 Hinge
5 Four claws
4 Three screws
(M1.7 × 2.5)
A = B
A
B
cover C