Sony Handycam Vision CCD-TRV107E Service Manual page 48

[SERVICE POSITION TO CHECK THE CAMERA SECTION]
Connection to Check the Camera Section
To check the camera section, set the camera to the "Forced camera power ON" mode.
Setting the "Forced Camera Power ON" mode
1) Select page: 0, address: 01, and set data: 01.
2) Select page: D, address: 10, set data: 01, and
press the PAUSE button of the adjustment remote
commander.
Note : If the machine malfunctions (the operating mode changes by itself), connect the FK-2000 block, CF-2000 block.
Control switch block (FK-2000) (12P)
When you operate the zoom,
connect the FK-2000 block to
CN710 of VC-272 board.
Mechanism deck
FP-397 flexible board
Audio
Monitor TV
Video
A/V out jack
Control switch block
(CF-2000) (22P)
CCD-TRV107E/TRV108E/TRV208E/TRV408E
Exiting the "Forced Camera Power ON" mode
1) Select page: 0, address: 01, and set data: 01.
2) Select page: D, address: 10, set data: 00, and press
the PAUSE button of the adjustment remote commander.
3) Select page: 0, address: 01, and set data: 00.
Adjustment remote
commander (RM-95)
VC-272 board
7 2
- 2
V C
2-11
Info lithium battery
(L series)
CPC-jig for SB
(J-6082-539-A)
AC power
AC IN
adaptor
Battery terminal board
Flexible board
(from lens block)(24P)
FP-400 flexible board (14P)
CD-354 board
Lens section