Advanced Recording Operations; Using The Wide Mode; Using The Fader Function - Sony Handycam Vision CCD-TRV107E Service Manual

CCD-TRV107E/TRV108E/TRV208E/TRV408E
— Advanced Recording Operations —

Using the wide mode

You can record a cinema-like picture (CINEMA)
or a 16:9 wide picture to watch on the 16:9 wide-
screen TV (16:9FULL). Refer to the operating
instructions of your TV.
CINEMA
Black bands appear on the screen during
recording in the CINEMA mode [a], playing
back on a normal TV [b] or a wide-screen TV [c].
If you set the screen mode of the wide-screen TV
to the zoom mode, a picture without black bands
appears [d].
16:9FULL
The picture during recording in the 16:9FULL
mode [e], or playing back on a normal TV [f] or a
wide-screen TV [g] is horizontally compressed.
If you set the screen mode of the wide-screen TV
to the full mode, you can watch correctly
proportioned images in wide-screen format [h].
CINEMA
CINEMA
[a]
16:9FULL
16:9FULL
[e]
44
Using the fader
function
You can fade in or out to give your recording a
professional appearance.
FADER
M.FADER (mosaic)/
STRIPE
BOUNCE
(Fade in only)/
MONOTONE
When fading in, the picture gradually changes
from black-and-white to colour.
When fading out, the picture gradually changes
from colour to black-and-white.
46
—
[a]
[c]
[d]
[e]
[f]
[g]
[b]
[c] [d]
[f]
[h]
[g]
—
Using the wide mode
In CAMERA mode, set 16:9WIDE to CINEMA or
16:9FULL in in the menu settings (p. 79).
[b]
To cancel the wide mode
Set 16:9WIDE to OFF in the menu settings.
If the wide mode is set to 16:9FULL (CCD-
TRV408E only)
The SteadyShot function does not work. If you
select 16:9FULL in the menu settings when the
SteadyShot function is working,
the SteadyShot function does not function.
[h]
In the wide mode
You cannot select the bounce function with
FADER.
Date or time indicator
When you record in the 16:9FULL mode, the date
or time indicator will be widened on wide-screen
TVs.
During recording
You cannot select or cancel the wide mode. When
you cancel the wide mode, set your camcorder to
the standby mode and then set 16:9WIDE to OFF
in the menu settings.

Using the fader function

(1) When fading in [a]
In the standby mode, press FADER until the
desired fader indicator flashes.
When fading out [b]
In the recording mode, press FADER until the
desired fader indicator flashes.
The indicator changes as follows:
t FADER t M.FADER t STRIPE
no indicator
R
MONOTONE T
The last selected fader mode is indicated first
of all.
* Fade in only
(2) Press START/STOP. The fader indicator stops
flashing.
After the fade in/out is carried out, your
camcorder automatically returns to the
normal mode.
To cancel the fader function
Before pressing START/STOP, press FADER
until the indicator disappears.
1-10
MENU
flashes and
(1)
r
BOUNCE*
t FADER t M.FADER t STRIPE
R
MONOTONE T
*
(2)
1
FADER
FADER
45
[a]
[b]
r
BOUNCE*
47