You Cannot Tune To Radio Stations - Sony STR-DN1050 Help Manual

Help Guide
MULTI CHANNEL AV RECEIVER
STR-DN1050/STR-DN850

You cannot tune to radio stations.

Check that the antennas (aerials) are connected securely. Adjust the antennas (aerials) and connect an external
antenna (aerial) if necessary.
The signal of the stations is too weak with automatic tuning. Use direct tuning.
Make sure you set the tuning scale correctly (when tuning to AM stations with direct tuning).
No stations have been preset or the preset stations have been cleared (when tuning by scanning preset stations is
used). Preset the stations.
Press DISPLAY repeatedly on the remote control so that the frequency appears on the display panel.
Notes on use
4-488-938-11(1)
Copyright 2014 Sony Corporation
289