Sony STR-DN1050 Help Manual page 237

Help Guide
MULTI CHANNEL AV RECEIVER
STR-DN1050/STR-DN850
Setting standby mode (Auto Standby)
You can set the receiver to switch to standby mode automatically when you do not operate the receiver or when no
signals are input to the receiver.
1. Select [Settings] - [System Settings] from the home menu.
2. Select [Auto Standby].
3. Set [On] or [Off].
When you set [On], the receiver switches to standby mode after approximately 20 minutes.
Note
This function does not work in the following cases:
[FM TUNER] or [AM TUNER] is selected as the input.
The software of the receiver is being updated.
If you use the Auto Standby mode and the sleep timer at the same time, the sleep timer has priority.
Notes on use
4-488-938-11(1)
Copyright 2014 Sony Corporation
226