Sony STR-DN1050 Help Manual page 152

Help Guide
MULTI CHANNEL AV RECEIVER
STR-DN1050/STR-DN850
Selecting a wireless LAN connection method
You can select the most suitable network connection method for your network environment from four network connection
methods. Confirm your network environment in advance.
If your wireless LAN router/access point supports the WPS (Wi-Fi Protected
Setup) push button configuration method
If your wireless LAN router/access point has a designated WPS button, see the following topic:
Method 1: Setting up a wireless network using the WPS push button configuration method
If your wireless LAN router/access point supports the WPS PIN code
configuration method
If you have an access point that supports WPS PIN (Personal Identification Number) code connections, see the following
topic:
Method 2: Setting up a wireless network using the WPS PIN code configuration method
If setting up a network connection by searching for your access point
You can search for available access points that are already configured and select a network name (SSID) from the
search results. For details, see the following topic:
Method 3: Setting up a network connection by selecting an access point (Access Point
Scan method)
If connecting to a new access point
You can add and connect to a new access point by entering a network name (SSID) and security key (WEP key or WPA
key) manually without using the WPS method. For details, see the following topic:
Method 4: Setting up a network connection by adding a new access point (manual setup
method)
Related Topic
Connecting the receiver to the network using the wireless LAN antenna (for wireless LAN connections only)
Notes on use
4-488-938-11(1)
141