Sony STR-DN1050 Help Manual page 287

Multi channel av receiver
Hide thumbs Also See for STR-DN1050:
Table of Contents

Advertisement

Help Guide
MULTI CHANNEL AV RECEIVER
STR-DN1050/STR-DN850
No sound or only a very low level of sound is heard, no matter which device is selected.
Check that all connecting cables are inserted to their input/output jacks on the receiver, speakers and the devices.
Check that the receiver and all devices are turned on.
Check that MASTER VOLUME on the receiver is not set to [VOL MIN].
Check that SPEAKERS on the receiver is not set to [SPK OFF].
Check that headphones are not connected to the receiver.
Press
to cancel the muting function.
Try pressing the input button on the remote control or turning INPUT SELECTOR on the receiver to select the device
of your choice.
If you want to listen to sound from the TV speaker, set [Audio Out] to [TV+AMP] in the HDMI Settings menu. If you
cannot play multi-channel audio source, set [AMP]. However, the sound will not be output through the TV speaker.
Sound may be interrupted when the sampling frequency, number of channels or audio format of audio output signals
from the playback device is switched.
Notes on use
4-488-938-11(1)
Copyright 2014 Sony Corporation
276

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Str-dn850

Table of Contents