Acticare TSE User Manual page 14

Interferential Mode
Using IC mode
Simply follow the steps outlined over the next
few pages.
STEP 1. Select IC Mode
Switch the Therapy Mode Switch on the
underside of the unit to the IC position.
5
When the Therapy Mode Switch is changed,
the device automatically switches off. The
"IC" symbol will be illuminated next time
Acticare IC is turned on to show that Acticare
IC is now in IC mode.
IC Icon
Caution.
Current (IC) therapy under the
guidance of a qualified practitioner.
Wrongful use of IC can cause
serious injury or death.
Therapy Mode Switch
TSE & TENS IC
Only use Interferential
STEP 2. Connect the electrodes
and lead wire(s)
1. Decide whether you are using one or two
channels.
2. If you are using one channel, connect the
small pins on the end of one lead wire to two
self adhesive or the optional rubber electrodes
illustrated. If you are using two channels
repeat this with another lead wire. Self-
adhesive electrodes are recommended only
for stimulation levels below 50mA indicated.
3. Connect the lead wire(s) to the main unit.
If you are using only one channel, pick either
connector slot and leave the other empty.
11