Settings On The Ap Radio Advanced Page - Cisco Aironet 1200 Series Software Configuration Manual

Radio Configuration

Settings on the AP Radio Advanced Page

Cisco Aironet 1200 Series Access Point Software Configuration Guide
3-30
Follow this link path to reach the AP Radio Advanced page:
On the Summary Status page, click Setup.
1.
On the Setup page, click Advanced in the AP Radio row under Network
2.
Ports.
The AP Radio Advanced page contains the following settings:
Requested Status
•
• Packet Forwarding
Default Multicast Address Filters
•
• Maximum Multicast Packets/Second
• Radio Cell Role
Maximum Number of Associations
•
• Use Aironet Extensions
• Require Use of Radio Firmware x.xx
Ethernet Encapsulation Transform
•
• Enhanced MIC verification for WEP
Temporal Key Integrity Protocol
•
Broadcast WEP Key rotation interval (sec)
•
Bridge Spacing
•
Accept Authentication Types
•
• Require EAP
Default Unicast Address Filter
•
Specified Access Points
•
• Radio Modulation
Radio Preamble
•
Chapter 3 Configuration
OL-2159-01