Entering Identity Information; Settings On The Ethernet Identification Page - Cisco Aironet 1200 Series Software Configuration Manual

Ethernet Configuration

Entering Identity Information

Settings on the Ethernet Identification Page

Cisco Aironet 1200 Series Access Point Software Configuration Guide
3-38
Ethernet Advanced—Contains settings for the operational status of the access
•
point's Ethernet port. You can also use this page to make temporary changes
in port status to help with troubleshooting network problems.
Ethernet Port—Lists key information on the access point's Ethernet port.
•
You use the Ethernet Identification page to enter basic locating and identity
information for the access point's Ethernet port.
Identification page.
Figure 3-16 The Ethernet Identification Page
Follow this link path to reach the Ethernet Identification page:
On the Summary Status page, click Setup.
1.
On the Setup page, click Identification in the Ethernet row under Network
2.
Ports.
The Ethernet Identification page contains the following settings:
Primary Port Settings
•
• Default IP Address
Chapter 3 Configuration
Figure 3-16 shows the Ethernet
OL-2159-01