Code 39 - Honeywell Voyager 1450g Series User Manual

Code 39

Code 39 On/Off
* On
Code 39 Start/Stop Characters
Start/Stop characters identify the leading and trailing ends of the bar code. You may either transmit, or not transmit Start/
Stop characters. Default = Don't Transmit.
Transmit
Code 39 Check Character
No Check Character indicates that the scanner reads and transmits bar code data with or without a check character.
When Check Character is set to Validate, but Don't Transmit, the unit only reads Code 39 bar codes printed with a check
character, but will not transmit the check character with the scanned data.
When Check Character is set to Validate and Transmit, the scanner only reads Code 39 bar codes printed with a check
character, and will transmit this character at the end of the scanned data. Default = No Check Character.
* No Check Character
Validate and Transmit
7 - 4
< Default All Code 39 Settings >
Off
* Don't Transmit
Validate, but Don't Transmit